Service Since 1947 When you are talking about custom molded rubber parts, it is easier to show you some of the examples of products that our customers have designed and requested. The custom molded gaskets, bellows, bushings, suction cups, grommets, grommeted tubing, stoppers, O-rings, and bumpers are manufactured using injection, compression and transfer molds in house. Many of the parts we mold are rubber to metal bonded parts. We also mold sheets or pads of custom formulated rubber for die cutting gaskets to customer specifications, sometimes as thin as .005" ± .0005" thick. We mold and inspect with a toolers microscope coating applicator tips with a .008" to .012" diameter ID hole in a Silicone and Fluorosilicone rubber for coating optical fiber. We injection mold grommeted tubes with a .010" to .012" diameter hole. Our technical and manufacturing teams excel in your most difficult custom molded products. We will take you from your prototype ideas, sampling and testing into production in the shortest most cost effective way possible. Molds and samples can be supplied in as little as 1 to 2 weeks depending on the complexity of your design. Hawthorne Rubber Mfg. Corp. P.O. Box 171 35 Fourth Avenue Hawthorne, NJ 07507-0171 Phone: 973-427-3337 FAX: 973-427-8233 or 800-643-2580 e-mail address: John@hawthornerubber.com ...Home Page, Hawthorne Rubber Mfg. Corp. Last updated: Saturday, November 28, 2004 Copyright ©2004 Hawthorne Rubber Mfg. Corp., All Rights Reserved.